Bendigo Electrical Fault Detection Services

When you have an electrical issue and you have no idea what the problem is, we can help with electrical fault detection. That means we can come to you and find out exactly what is wrong and fix it at the same time, if possible. Initially, what you should do is consider if the problem poses any danger. ​You should make sure everyone is made aware of the potential risk so they stay clear of the situation.

Then you can call us up and explain to us as best as you can what is going on. We will be able to provide you with answers as to whether or not it is a dangerous situation. Either way, we can help and send out an electrician in Bendigo to get to you fast. 

Because we are a premier electrical company, it is our job to be able to figure out exactly what is wrong within a power system. We have all the necessary testing equipment, knowledge and tools to find the source of the problem fast. Nobody wants to have a dodgy electrical power system with expensive appliances plugged in. So don’t even wait one minute, give us a call now and we can get moving.

Different Types of Electrical Faults

It is always good to have some understanding of the more common electrical faults. That way, when they do eventually come about, you recognise the issue and know what steps to take.

​Below we have made a short list of the most common problems:

Our Electrical Services

• Domestic Electricians
• Commercial Electricians
• Emergency Electricians
• Electrical Maintenance

Emergency Electrical Services

• ​Emergency Electrical Repairs
• Electrical Fault detection
• Blown Fuse repairs
• Power Failures
• Switchboard & Meterbox services
• Surge Protection
• Emergency exit light installation

Circuit Overload

Having the circuit overload is a very common problem. Some people don’t understand that you can’t just keep plugging in electric devices into the same power plug. Depending on the appliance, each plug is rated to have one appliance. So the answer is to have power boards, which is fine if the appliances aren’t too power hungry. But if you keep plugging in more and more, then eventually it becomes too much and triggers the circuit breaker. The simple solution is to either not have as many appliances plugged in, plug them into different sockets or call us and we can install more power points for you.

Sparking Power Points

If you notice that there is a sparking sound coming from your power outlets then this is a problem. Sometimes the plug will even keep feeding power even though it is switched off. This requires an electrician to replace the power point. You might not be able to hear the sparking but sometimes you can smell it, a burning smell. You should unplug all devices that are connected to a faulty power plug. You should also contact us immediately and we can come to your aid fast.

---

Electrical Surges

When there is a power surge, that means too much electricity was put into the system in one go. This can have a major effect, especially on appliances that are plugged in. Usually what will happen is a circuit breaker will be triggered and turn the power off to stop the inflow of electricity. This can be caused by a few things, fallen nearby power lines, house wiring that is faulty or even lightning. If the problem can’t be solved by turning the safety switches back on, then get in contact with us right away.

Flickering Lights

Obviously, flickering lights is because there is a loose connection somewhere. Usually the light bulb is not properly plugged into the light fixture. Turn the light off and allow the light bulb to cool down before touching it. Then try to tighten the bulb a bit better and see if the flickering goes away. If there is still a flicker going on, there is another problem that needs attention from an electrician. Give us a call and we will sort it out.

If you have a problem with your electricity and there is a fault that needs to be fixed, get in touch and we will send an electrician in Bendigo to you.